Printed PVC plastic card with metallic finishing

Printed PVC plastic card with metallic finishing

Plastic cards of various types with individually designed imprint

28,97 kn (Net 24,34 kn )

incl. 19% VAT , plus

From	Unit price
100	28,97 kn* (Net 24,34 kn *)
200	14,62 kn* (Net 12,28 kn *)
500	7,35 kn* (Net 6,18 kn *)
1000	4,48 kn* (Net 3,77 kn *)
2000	3,86 kn* (Net 3,24 kn *)
5000	2,51 kn* (Net 2,11 kn *)
10000	1,97 kn* (Net 1,66 kn *)
25000	1,17 kn* (Net 0,98 kn *)

Upload files (if the file is not available currently, please go to the next step "Continue to order")

The maximum size per file is: 8 MB

File Upload

Please note the minimum purchase quantity of 100 Units.

Available immediately

Additional equipment to order:

x ID holder horizontal frosted + 1,13 kn

x Badge holder lanyard with detachable buckle black + 1,01 kn

Description

How is it printed?

The world's most popular method is offset printing, used for over 80% of all plastic card printing. This delivers high quality and faithful colour accuracy. Almost any design or layout required can be achieved thanks to this high-resolution printing process. Excellent colour quality and a very high gloss can be achieved on plastic ID cards using offset printing ink. The print is rendered in up to 120 spot colours using the euroscale colour space (Y yellow, M magenta, C cyan, K black) or special colours like HKS or Pantone. Thanks to the Euroscale colour space, even difficult photos and drawings can easily be printed onto a plastic card.

Technical details:

Material: Plastic
Standard Dimensions: 85.60 x 53.98 mm
Print type: Sheet-fed offset printing both sides 4/4

Print files:

Please upload your print file to the shopping cart. If, during the ordering process, this is not yet available, please forward it to info@karteo.com, quoting your order number. If you do not have a file ready to print, please send us your required text or logo by email. You will then be sent a proof of the artwork. Once you have checked this over, you can approve it for production.

More information:

If plastic cards such as employee ID cards and entry tickets have to be shown time and again at large events, trade fairs, etc., it is tedious getting them out of pockets or wallets each time. It is much simpler if they are worn around the neck using a lanyard or fastened to the belt or lapels with a clip. Either an additional ID holder or a handy punch card can then be attached to this.

These special cards are punched and pre-perforated. This means you can easily break one plastic card down into three small ones. Ball chain necklaces are ideal for attaching these.

Card punching is particularly recommended if the cards are used only for a short time (at fairs and conferences, for example) and do not necessarily need to be protected with a plastic sleeve. Depending on design, holes are punched either on the long or short side of the plastic card and can take the form of either a round hole (3 mm or 5 mm diameter) or an elongated hole in a standard 3 x 13 mm format. This method of card punching is recommended with crocodile and similar-shaped clips.